|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
STB6100 8PSK/QPSK direct conversion tuner IC DATA BRIEF DESCRIPTION The STB6100 ASIC is a highly integrated, low-cost direct conversion (zero IF) tuner IC for DVB-S2 broadcast satellite applications. This device includes an LNA, down-converting mixers, baseband low-pass filters, gain control, on-chip VCO and a low noise PLL. Its wide gain control range is well suited for low symbol rate applications. The STB6100 is controlled by a simple two wire interface and has been designed to minimize the external bill of materials to reduce manufacturing costs and to simplify the board layout. The reduced component count ensures greater system reliability leading to increase consumer satisfaction. The DVB-S2 standard increases the capacity of satellite broadcasts by as much as 30%, so enabling the effective deployment of high data rate applications such as high definition TV and broadband internet. Figure 2. Integrated silicon tuner VCO_BYP SYN_BYP VCCSCV Packaged in a small QFN 32-pin package, it is ideal for low cost DBS design. Figure 1. Package (420 + 36 PBGA 27 x 27) xxxx CP_BYP VTUNE 3 2 GND 1 3 1 3 0 2 9 OP AMP 2 8 2 7 2 6 GND 2 5 24 XTAL GND 2 /2 or /1 Delta Sigma /(Ni+Nf) LD PDF CP CP LD 23 XOOUT GND 3 Divide 2/4 22 DC Offset Cancellation XTALB GND 4 21 XO_BYP VCCMIX 5 0 o 20 90o IOUT VCCRF 6 AGC Control 19 IOUTB GND 7 DC Offset Cancellation BW 2-Wire Bus BB Gain 18 QOUTB RFIN 8 1 0 VREG3 1 1 AGC 1 2 TSTA 1 3 AS 1 4 DATA 1 5 CLK 17 1 6 QOUT 9 VCCBIAS VCCBB Rev. 1 September 2004 1/2 STB6100 FEATURES Powered by RF Magic 2-wire I2C serial interface Low cost integrated ZIF tuner for DVB-S2 and DIRECTV, VSAT and internet throuth satellite applications 8PSK/QPSK support Simple interface to ST's satellite demodulator devices Low phase noise, excellent linearity and high LO harmonics rejection Small QFN-32 pin package Direct conversion Input range 950 to 2150 MHz Supports 1 to 45 Msymbol/s Fully integrated LO and PLL Differential I/Q outputs Buffered XO output to clock other devices Low external component count Low power consumption Table 1. Order Codes Part Number STB6100 STB6100T Description Standard tray version Tape and real REVISION HISTORY Table 2. Revision History Date September-2004 Revision 1 First Issue Description of Changes Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners (c) 2004 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 2/2 |
Price & Availability of STB6100 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |